Test

PRONOR OW2.6

Snowblower Pronar OFW2.6

Snowblower Pronar OFW 2.6 is the ideal device for removing thick layers of snow, ice and slush, especially dense from any surface, regardless of its thickness and structure.

PRONOR OW2.6

Snowblower Pronar OFW2.6

Snowblower Pronar OFW 2.6 is the ideal device for removing thick layers of snow, ice and slush, especially dense from any surface, regardless of its thickness and structure.

Snowblower Pronar OFW 2.6 is the ideal device for removing thick layers of snow, ice and slush, especially dense from any surface, regardless of its thickness and structure. It will prove ideal on residential streets, roads, parks and very large areas, and places where the plow is not able to remove the snow cover or the it is necessary to collect and transfer the material aside. The working width of 2,6m allows de-snowing of large surfaces in just one pass.

The OFW 2.6 Snowblower may be aggregated with carriers equipped with PTO drive The 1000 rpm drive ensure fast and smooth operation. Additionally the machine has a universal transmission allows for attaching with machines that have euither left, or right rotation direction. The machine also has an adjustable working angle of angle +/- 10 *, which allows to force the working position. The snowblower may be aggregated the most popular media, with the suspension of three-point linkage cat. II/ III, DIN plate type A or B, Setra plate.

The cutting-rotor system used in Pronar OFW 2.6 ideally meets the requirements of snow removing machines. The combination cutter- (ideal to reject very hard snow) with rotor- system (very good for soft and friable snow) ensures the optimal operation and efficiency on all types of snow and in all conditions.

Snowblower Pronar OFW 2.6 – features:

Toggle title

Toggle content goes here, click edit button to change this text.

Toggle title

Toggle content goes here, click edit button to change this text.

Mounting method Cat II three-point hitch – swing
Brush drive hydraulic engine
Working width (angle +25 or -25 deegres) 2600 mm
Max oil pressure 21 MPa
Electric power supply 12 V
Nominal oil pump capacity 25 – 55 l/min
Brush recommended speed 100-150 rpm
Brush max. speed 200 rpm
Brush diameter 650 mm
Brush turning ręczny +25° lub -25°
Recommended working speed 6 km/h
Efficiency for recommended working speed at 25 degrees turning angle 15600 m2/h
Weight 478 kg
Dimensions (length, width, height) 1360/2998/1180 mm