Spreader PRONAR HPT40
Spreader PRONAR HPT40 is used for surface spreading of aggregating materials (sand, aggregate) and chemicals (sodium chloride, calcium chloride, magnesium chloride, brine) in winter road maintenance operations. The spreader PRONAR HPT40 has our patented capacity adjustment system of the main hopper, allowing you to change the load box capacity from 4.5 to 6 m3. It may be aggregated on heavy vehicles equipped with loading platform and complying with the requirements set out in the table. HPT model is equipped with additional brine tanks for pre-wetting the spreaded materials.
Patented capacity adjustment system of the hopper allows you to mount spreader on a variety of carriers, without any risk of overload.
All spreading system components made of stainless steel to ensure long service life in highly corrosive environments.
EASY TO USE
All activities related to the handling of machine while sprinkling are realized from the cab, which greatly facilitates his work.
LCD control panel informs the operator about all parameters.
Integrated hydraulic pump powered on a telescopic boom powered by a dragged. A fifth wheel, in comparison with the salt spreaders driven by internal combustion engine, helps saves fuel.
|Capacity||4,5/ 5,25/ 6||m3|
|Density of sCATtering chemicals||5 – 40||g/m2|
|Density of sCATtering means for causing roughness||50 – 200||g/m2|
|Pressure in hydraulic system||16||Mpa|
|Electric power supply||24||V|
|Working speed||max 70||km/h|
|Brine tanks capacity||1800||dm3|
|Carrier capacity (depends of tank position)||10/ 11/ 12 t||t|
|Carrier platform minimum width||2300||mm|
|Carrier platform minimum length||3850||mm|
Hydraulic system (additional pressure filter)
Hydraulic connector (rear and sides) UNIMOG 500
Desktop bracket UNIMOG
UNIMOG power cable
Without brine tanks