Snow plows PRONAR PUV-1400 & PRONAR PUV-1600

Snow plows PRONAR PUV-1400 & PRONAR PUV-1600 are designed for removing snow from roads, plazas, parking lots, bicycle paths, pedestrian walkways and other hardened surfaces. Rigid construction is best suited for narrow alleyways and pedestrian paths. Setting of the mouldboard allows for 4 working positions (left/right/V-position, Y-position for scooping). The blade is divided into sections for faster and easier change of the working parts which allows for fast change and saves time. The plows have two mouldboards which allow to operate with a specifically set position best suited for current needs.


Ability to mount on different skid steers, loaders, backhoes and Rother vehicles that mee tup demands from the construction card of equipment.


Latest materials and production methods used in the manufacturing process.


Only one pair of hydraulic couplings required to operate the plow.


Marker lights and additional reflective lements ensure good visibility of equipment on the road.


To facilitate work in urban areas.

Mounting Category 1 three-point hitch, rigid type Category I/ II rigid suspension
Working width 1300 / 1400 1493 / 1600 mm
No. of working positions 4 (possibility of mediate positions)
Cutting edges Rubber
Power demand Max. 30 HP
Control electro-hydraulic from carrier
Shock absorbtion for the steel cutting edge no on springs
Hydraulic power supply 16- 20 MPa
Electric power supply 12 V
Clearance lights Standard
Working speed 10 km/h
Weight 155 200 kg

Support wheels
Metal Cutting Edges (with polyurethane spring)
Lighter socket splitter
Hydraulic shock absorbtion
Side bumber – for rubber plowshares
3 pt hitch cat. I / II – swing suspension
3 pt hitch cat. I / II – rigid suspension
3 pt hitch cat. I / 0 – rigid suspension
Kramer 350 3pt mounting
Kramer 480 – swing suspension
EURO mounting frame (front loader) -swing suspension
1100 plate without fasteners -swing suspension
1100 plate without fasteners -rotary suspension
1100 plate without fasteners -rotary suspension
A-Frame cat. I / I narrow – rigid suspension
A-Frame cat. I / I narrow – swing suspension
A-Frame cat. I / 0 – rigid suspension
ATLAS AR 35 – swing suspension
Avant 635 – swing suspension
Euro-SMS – swing suspension
Euro-SMS – rotary suspension
CAT 906 – swing suspension
GEHL- swing suspension
GIANT 452 – swing suspension
FORD 655C – swing suspension
JCB2CX – swing suspension
JCB3CX Contractor / JCB 2CX – swing suspension
ŁC-1650 – swing suspension
MANITOU MRT2150 – swing suspension
MX – swing suspension
New Holland B90 – swing suspension
Schaffer – swing suspension
Terex – swing suspension
VOLVO L30 – swing suspension
WILLE 455 – swing suspension
WEIDEMANN 2070×50 v. PRONAR- swing suspension
WEIDEMANN 2070×50 (until 2007) – swing suspension
Forklift mounting – swing suspension