Snow plow PRONAR PUS-S

Solutions used in the  PUS-S plow series enables operation even in extreme winter conditions. The design of the plow and a variety of available blades allow efficient and effective removal of loose snow just after the rain has stopped, slush, snow drifts and ice. The robust design of the plow makes it prepared to remove the thick snow cover by truck in difficult conditions that prevail at clearing snow. Available in working widths of:

  • PUS-S27- 2700mm,
  • PUS-S32- 3200mm,
  • PUS-S34- 3420mm,
  • PUS-S36- 3600mm,
  • PUS-S40- 4020mm,


Moulboards are made of metal, and the large mass of plows allow removal of  large amounts of snow.


Modular construction and safeguard springs  on each segments springs good protection against damage when the plow encounters an obstacle, and thus give the opportunity to develop a working speed of 60 km / h. This enables both quicker snow removal from road after a snowfall and a significant operating cost reduction. It is possible to equip every segment of the plow in an extra spring increasing downforce to the ground, which is useful for removing ice and snow layers.


The perfect tool for clearing all surfaces and in all conditions. Possibility of steering from carrier’s hydraulics or independent steering system.


Easy aggregation with different utility boards (DIN A, DIN B, SETRA).


The plow can be customised to the needs and requirements of customer.

  • Different kinds of working blades (rubber, perforated steel, Kuper combo blade)
  • different guiding methods (twin wheels or Kuper skids).
  • Control panel in driver’s cab allows easy and troublefree operation.
  • Additional road lights for safe operations and good visibility
Standard version PUS-S27 PUS-S32 PUS-S34 PUS-S36 PUS-S40  
Working width
0° working angle 2700 3200 3400 3600 4000 mm
30° working angle L = P =2350* L = P=2790* L = P =2960* L = P =3135* L = P =3490* mm
Total width 3200 3700 3900 4100 4500 mm
Total height 1170/1610**
Number of segments 3 4 4 4 5 szt
Weight 930 1030 1050 1100 1200 kg
Mounting  DIN 76060 type A utility board
Angle turning ±30°
Plowshares rigid rubber plowshare
Poer demand 24 V
Working speed max. 60 km/h
Supporting wheels standard
Marker lights standard
Hydraulic instalation 2 pair of quick couplers (size 1/2″ iso 16028 )
Parking stands standard
Steering method panel in driver’s cab
Side bumpers standard
2 cylinders for mouldboard turning standard
1 cylinder for vertical movement standard
1 downforce spring per segment standard

Dust cover (canvas)
Additional lights
2 pressing springs per segment
Electrohudraulic steering (power pack)
DIN-76060 type A carrier front plate
SETRA mounting frame
Kuper skids
Steel perforated blades (rigid mounting)
Kuper combi-blade (with shockabsorption)
Hydraulic instalation (1 pair og quick-couplings)
DIN-76060 type B carrier front plate