Sweeper PRONAR ZMC 3.1
The SWEEPER PRONAR ZMC 3.1 is an elevator sweeper with mechanical derbis transport system. Sweeper is based on a system of two rotary disc brushes and a cylindrical brush sweeps the debris onto a scraper conveyor belt.
Differences in the construction of the sweeper compared to the ZMC 3.0 sweeper
• Tiltable water tanks
• Roller brush made from segment disc
• Hydraulically retractable disc brushes for transport
• Hydraulics with two hydraulic pumps and oil cooler
• Control panel with color display
• Sprinkler pressure adjustment from the operator panel
• 150 bar pressure washer with reel and lance
• Openable rear cover
• Rear overrun beam
SIMPLE TO USE
Thanks to the easy-to-use panel, the operator can quickly set the required parameters
EFFICIENT
High work efficiency (approx. 54,000 m2/ h)
FUNCTIONAL
\Side discharge facilitating the work of the operator – extremely useful when unloading dirt onto a trailer or into a container
ECONOMICAL
Low operating costs
UNIVERSAL
Possibility of aggregation with all tractors available on the market – equipped with a lower transport hitch of a fork type, pitonfix or a hook with a minimum vertical load capacity of 1700 kg and a PTO speed of 540 rpm
| Weight | 3300 | kg |
| Max. working width | 2,4 – 2,7 | m |
| Power supply | Hydraulic pumps with a multiplier mounted on the sweeper drawbar. Driven by an articulated telescopic shaft. | |
| PTO | 540 | rpm |
| Working speed | 0 – 20 | kph |
| Water tank capacity | 1120 | dm3 |
| Dust container capacity | 3 | m3 |
| Electric power supply | 12 | V |
| Container emptying height | 2200 | mm |
| Wheels | 235/75R17,5 | |
• Torsion drawbar lower drawbar – optional upper drawbar
• Vibrator – for easy emptying of the dirt tank
• Work lighting – disc brushes work zones
• Hydraulic left brush tilt – tilt control from the cabin
• Additional warning lamps – mounted on the top cowl
• Set of chocks – 2 wheel chocks with brackets
• Articulated telescopic shaft
• Right side brush
• Increasing the sweeping width; reach: 700 mm beyond the outline of the machine
• Extension of chute by 200mm
• High pressure washer – water pressure up to 150 bar
• Adjusting the spray pressure – setting the spray pressure from the operator panel
• Galvanized frame – painted in standard version
• Different colors – after agreeing with the client
• Spraying beam mounted on the front axle of the tractor
• Additional water gauge mounted on the left side
• Central lubrication
• Step mounted on the left side
• Electric actuation of nozzles
Related Products
