Sweeper PRONAR ZM-2300M

Home > Dealerships > Pronar > Municipal Equipment > Sweepers > Sweeper PRONAR ZM-2300M

General Details

The newest ZM-2300M sweeper is designed for removal of dirt from city streets, sidewalks, squares, parking lots, other paved areas and roads . It can also be used in the winter for clearing snow. Construction of the sweeper, its features and functionality make ZM- 2300M a perfect choice for municipal companies and industrial plants, supermarkets, housing estates. The possibility of aggregation to tractors or loaders make it a good machine for agriculture, horticulture and the private sector.

ZM-2300M is a hydraulically driven attachable appliance designer for mounting on the front of carrying vehicle. Extensive range of accessories allows the sweeper to be adapted to individual customer needs.

Sweeper PRONAR ZM-2300M- features:

JACK-SCREW

The jack-screw allows changing the frame height above the ground as the brush wears out. The stepless height adjustment of the sweeping roller provides efficient sweeping and maximises brush lifespan.

CYLINDRIC BRUSH 2.525m

Thanks to a segment construction, the 650mm – diameter cylindric brush is available in a number of possibile types of wreaths: simple wreaths (with by spacer rings) bent wreaths (forming a honeycomb structures) or wreaths with bristles studded into plastic rings. This, combined with various bristle materials – propylene (PPN) – through metal wire (straight or bent) – to a mixture of these materials, gives you the ability to match the machine model to the specific needs of the buyer. The roller brush is driven by a powerful hydraulic motor, built inside the shaft, which eliminates the risk of damage by hitting an obstacle, and also reduces the width of the machine to 2.55 m.

HEIGHT AND POSITION MARKER

The special design of the suspension system allows the sweeper to traverse up and down. Additionally it has an angular displacement in two planes, making it perfectly copies the area. The use of indicators visible to the operator, which show the position of the machine with respect to the carrier, reduces the risk of damage. This can occur when working with large tractors or wheel loaders on uneven terrain or when crossing obstacles (eg. Speed humps).

FRONT AND REAR SUPPORTING WHEEL

The machine uses wheel sets designed to carry heavy loads and work in harsh conditions. The kit is composed of a full wheel made of elastic rubber (250mm diameter and 80 mm thickness and a very durable casing ).

TURNING REGULATOR

The sweeper comes in standard with a manual turning lock, allowing you to change the approach angule of the machine by 25 ° – clockwise and anti-clockwise. The angle changes allows sweeping-out waste to the right or left side. On request, the manual lock may be replaced by a hydraulic cylinder, which provides stepless regulation in the same range.

RIGHT AND LEFT SIDE BRUSH

An important function, from the point of view of the user, is sweeping out waste from curbs or wall sides. This operation requires use of side brush (disc). The ZM-2300M sweeper can be equipped with right, left or both brushes (available as options). One side brush (600 mm diameter) increases the machine’s working width up to 0.4 meters. It can be hidden in the sweeper’s outline for transportation. It can be also raised and locked in the upright position. Each side brush can be independently switched on and its speed can be adjusted independently.

TILTING WASTE TANK 470 liters

Another very useful piece of equipment is extra large waste tank with a capacity of about 480 liters. It is provided with a central support wheel and a hydraulic actuator for rotating it to dispose of accumulated waste. The space between the container and the ground is sealed by an elastic belt with hardwearing material. Tilting the bottom makes it easy to drive over obstacles while sweeping eg. Speed bumps.

UNIVERSAL FITTING FRAME

Universal fitting frame allows aggregation with a full range of carrying vehicles e.g. tractors, loaders, forklifts etc.

Technical data

Mounting	3-pt hitch cat. II and III
Main brush drive (medium hardness)	Hydraulic engine
Emptying dirt container	Hydraulic
Working width	2525-2795	mm
Waste container capacity	470	dm3
Working oil pressure	160	MPa
Brushing roller recommended speed	100-150	rpm
Brushing roller max. speed	195	rpm
Recommended brushing speed	6	km/h
Efficiency for recommended speed	13800-19200	m2/h
Weight	740-1060	kg

Additional equipment

Without waste container
2 side brushes
Left side brush
Right side brush
Sprinkler system
Hydraulic turning mechanism
Hydraulic instalation for oilflow over 90l/min
Other mounting frames
Main brush -soft
Main brush -hard
Main brush – very hardhard
Side brush – soft
Side brush – hard